See below the results over different RAID Controllers.
The results are sorted by FSYNC/SECOND.
The highest score will be on top.
System Specs are at the bottom of the page.
Average results over 4 runs with pveperf :
Raid Controller Firmware Buffered Reads / Average Seek Time / FSYNC/SECOND
Intel RS2BL040 (4port / 512MB) 12.7.0-0007 261.65 MB/sec / 6.74 ms / 3466.87
Intel SRCSATAWB (8port / 128MB) 11.0.1-0057 258,51 MB/sec / 7.03 ms / 2814,18
System Configuration:
(Click on product for more information)
Intel SC5650UP
1x Intel S3420GPLX / Firmware:
BIOS : 51
ME : 6.0.30.1199
BMC : 25
FRUSDR : 22
1x Intel Xeon X3470 2.93Ghz
2x 8GB DDR3 ECC KVR1333D3E9S/8G 1333MHz
1x Samsung SH-224 DVD +/- RW
2x Hipro HP-4001E0 400W Power Supply Unit
4x Western Digital WD2503ABYX 250GB 7.200RPM 64MB Drive Cache
RAID Configuration:
VD01: RAID10 / 4x Western Digital WD2503ABYX
- Capacity: 465.660 GB
- Strip Size: 256 KB
- Access: RW
- I/O: Direct
- Read: Always read ahead
- Disk Cache: Disabled
- Disable BGI: Yes
- Write: Always Write back
Proxmox Configuration:
Proxmox VE 3.2
- Partition type: ext4
- Root Partition: 10GB
- Swap Size: 20GB
- All other settings default.
No comments:
Post a Comment